Site Information

 Loading... Please wait...
  • Image 1
  • Image 2

Everbuild Timber & Laminate Sealant

Price: £2.40 (inc Vat) £2.00 (exc Vat)

Product Description

Timber and Laminate Sealant, formulated from high performance acrylic polymer, is an advanced flexible sealant and gap filler, designed for sealing around timber, laminates and melamine coated board in flooring and furniture applications.

Formulated using high clarity lightfast colour pigments, the colour range offers a near to exact match to most popular laminate floor, fitted furniture and melamine board finishes to give the perfect finish for installing floors, kitchens and furniture.


  • Permanently flexible/durable polymer rich formula.
  • Large colour range gives near/exact match to most common fitted furniture, laminate floor and kitchen worktop colour schemes.
  • Silicone and solvent free – low odour.
  • Contains a fungicide to prevent mold growth.
  • Adheres to most common substrates.
  • Non hazardous formula – water clean up.
  • May be painted, varnished or stained once cured.
  • Easy to apply and tool.
  • 20 years life expectancy.
  • Certified for interior use as a sealant under the harmonized European standard EN15651 complying with the Construction Product Directive.

Areas For Use

  • Sealing around the perimeter of all types of laminate and hardwood flooring; provides a flexible decorative seal that accommodates the natural movement of wood.
  • Ideals for sealing around awkward protrusions such as radiator pipes, door stops and timber thresholds.
  • For daughtproofing around timber flooring to provide an effective dust and airtight seal.
  • For sealing around all types of fitted furniture i.e. bedroom fittings, laminate worktops etc. Ideal for sealing between the wall and fitted furniture to hide unsightly gaps.
  • Sealing internally around hardwood and softwood joinery components such as door frames.
  • Ideal for internal wood stained finishes.

Surface Preparation

Ensure surfaces to be sealed are sound, clean and dry.


Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45° with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed. Smooth the sealant down using a wetted spatula, piece of wood or finger. Any mistakes can be rectified by removing sealant with a damp sponge or cloth before re-applying. If overpainting or staining, allow to cure first. (Full cure 24-48 hours at normal temperatures).

Specific Data

Movement Accommodation

+ or – 12.5%

Skinning Time

30 mins @ 20°C

Cure Time

2mm per 24 hours

Specific Gravity




Service Temperature Resistance

-15 to +70°C

Application Temperature

+2 to +30°C


Uncured sealant: warm water

Minimum Joint Width


Maximum Joint Width


Joint Ratio

Maximum depth 70% of joint width

Elongation At Break

>400% to ISO8339


Excellent with most paints, varnishes or stains once fully cured.


@ 10 linear metres for a 9mm x 9mm fillet joint.

Featured Products

Join Our Mailing List

Copyright © 2015 Building Plastics Direct. Sitemap | Shopping Cart Software by Bigcommerce | Website Design by OCDesignsonline